Technicolor HD Security Terminator Model Manuel d'utilisateur télécharger pdf (Page 4)

Technicolor MCS

101 W. 103

Indianapolis, IN 46290

www.technicolor.com/mcs

MessageType: 0 = Download

This feature is used to update the software of the DCI401MCS. Using a TFPT server such as

TFTPd32, put the file name of the new software in the Filename field, enter the correct

TFPT_IP: address for the TFTP server, then press SUBMIT. You should notice the software

transfer on the TFTP server, then the broadcast of the software to the network. Connected

DCI401MCSs eligible for this software update should immediately begin the update process.

MessageType: 3 = Feature

This allows operators to turn on or off specific features of the DCI401MCS including the

remote power button, function buttons and menu access. Nearly every menu item or

feature in the DCI401MCS can be controlled, but for this document’s purpose, only a few key

items will be provided. Specific features are controlled by a 32 bit field entered as an 8 digit

hex number.

Select 3 = Feature,

Set your desired Receiver_ID,

In the Major_Number field, enter the desired code to turn on or off device features.

Hit Submit to broadcast this feature.

Example: Disable channel change

In this example, entering hex value 0x20000000 in the Major_Number field, will turn off the

ability of each DCI401MCS to change from the channel the device is currently tuned to,

essentially locking the DCI401MCS to a specific channel.

1 2 3 4 5 6 7 8 9 ... 13 14

Pas de commentaire

Technicolor HD Security Terminator Model Manuel d'utilisateur Page 4